\
|
|
Ceiling Mounted Heater Thermostat, UH Series With Thermostat
|
|
General Characteristics: Ceiling Mounted Heater Thermostat, UH Series With Thermostat
|
Heavy gauge welded steel cabinet with powder coated finish and
control compartment with a hinged and latched access door,
simplifying wiring installation and Maintenance.
Circular copper clad steel sheath element with continuously brazed
steel fins formed to match the air delivery pattern of the fan Blade.
All units come equipped with automatic resetting type limit controls
to de-energize the heater should an over-temperature situation
occur.
Totally enclosed, single phase, permanently lubricated, thermally
protected motors with unit bearings on 3 KW - 10 KW models and
sleeve bearings on 12.5 KW - 48 KW models - mounted with rubber
insulators to minimize vibration and noise. Fan assembly enclosed
by a heavy gauge, close spaced, chrome plated wire guard.
Louvers are individually adjustable for directional control of air flow
and the entire assembly can be repositioned in the field from down
flow to up flow or left / right directional air Flow.
20 KW through 48 KW units and all 480V have built in 24 Volt
transformer for low voltaje remote thermostat application. 25 KW
through 48 KW models available in 2-stage on special order (consult
factory).
Unit Heaters can be mounted with the motor shaft from horizontal to
downward at 45° off horizontal. Pre-drilled holes and installed
threaded nuts provided to allow hanging by threaded rods – 1/4” for
units up to 15 KW and 5/16” for 20 KW units and larger.
Optional wall / ceiling mounting omercia are available for all units.
25 Amp SPST Thermostat (40°F-110°F)
|
Product Applications: Ceiling Mounted Heater Thermostat, UH Series With Thermostat
|
Recommended for all industrial, commercial, and residential.
For indoor and outdoor use.
|
Warranty: Ceiling Mounted Heater Thermostat, UH Series With Thermostat
|
Manufacturer's Limited Warranty: 1 Year.
|
|
|
|
|
|
|