\
|
|
Plenum Duct Heater, 7200 Series
|
|
General Characteristics: Plenum Duct Heater, 7200 Series
|
The 7200 Series is a 20 gauge galvanized plenum duct heater.
Is strictly for indoor use only.
For Industrial and Commercial use.
Is ETL-CETL listed.
With a variable speed motor, factory set at maximum, the motor speed can be adjusted to increase its heat rise.
It is acoustically insulated with 1” fiberglass and has access panels on both sides of the cabinet.
It has both inlet and outlet screens, plus a duct connection.
The filter rack on inlet has throw away filters.
Is manufactured with 24 volt controls, disconnect switch, air flow switch and terminal blocks.
The 7200 Series has an automatic primary limit control and secondary fuse link.
Comes with single point connection and a dust tight control enclosure.
For proportionally regulated heat output the 7200 Series has optional wall thermostat, unit thermostat or SSR control.
Made in the U.S.A.
|
Product Applications: Plenum Duct Heater, 7200 Series
|
For industrial and commercial use or anywhere that might have a plenum, such as warehouses, factories, restaurants, offices, workshops or storage buildings ect.
|
Warranty: Plenum Duct Heater, 7200 Series
|
Manufacturer’s Warranty: 1 year.
Life expectancy of all heating elements 5,000 hours.
Heating elements operate at 50/60 Hertz
|
|
|
|
|
|
|